Firefly - Intelligent alarm unit
FireFly is used in pumping stations, treatment plants, wells, tanks, rivers ect.
Firefly - Intelligent alarm unit
FIREFLY is designed for the use as a simple alarm device according to the term “The local red alarm lamp has become intelligent”.
FIREFLY is a battery-powered or fixed 3V DC intelligent alarm unit that can replace the existing red alarm lamp, so that pump alarms and high-water level switch are sent directly to the SCADA-system via AcowaCore.


FIREFLY has both digital and analogue inputs
FIREFLY comes with 2 digital inputs and 1 analogue input 0-10V DC. This is used for measuring pump current for the detecting of number of starts and operating time in total values, as well as possibility for pump status (On or OFF), in a 5 minutes resolution. This is only with the use of a external power coil.
FIREFLY can be delivered with a 5-year Sigfox subscription and batteries or power supply – ready to install.
- Specifications
- Item number
- Applications
- Documentation
SPECIFICATIONS | |
---|---|
Material | ABS plastic |
Diameter | 104mm |
Installation | Min. 38mm hole with nut |
Cable connection | 4 pcs. clamps |
Communication | SigFox |
Antenna | Build-in |
Enclusere class | IP67 |
Power supply | 3V DC - 3,7V DC |
Batteries | 2 pcs. Lithium AA (not included) |
NOTE! FireFly is not EX-classified and must therefore not be installed in EX areas.
Item number | Description |
---|---|
1772-19120001 | FIREFLY for battery. |
1772-19120001-P | FIREFLY for fixed supply. |
1122-SigFox U | 5 year SigFox subscription incl. creation on Sigfox back-end as well as invoice handling. |
CS-651-20 | Power coil for monitoring motor current for pump start and operating hours |
6106301404-4 | Lithium AA 1.5V Battery |
RS-15-3.3 | Power supply 3.3-3.7V 3A 9.9W mini size |
The TurTle level sensor is very flexible and can be used in many different applications, such as:
- Pumping stations
- Sewage treatment plants
- Stormflow
- Level monitoring
- Rivers or streams
- Reservoir and tanks